Seachem De-Nitrate – Nitrate Remover

$3.77

8.5 oz

8 in stock

SKU: 000116013604 Category:

Description

De-Nitrate removes nitrates, nitrites, ammonia, and organics from both fresh and marine water. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts. Even when exhausted as an organic adsorbent, De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed. This product is sold by volume. Cited weight is minimal weight.

DIRECTIONS: For best results, De-Nitrate should be placed to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been in use for several days, nitrate concentrations should start to fall and level off gradually at a concentration of about 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 250 mL of De-Nitrate treats about 50-100 L (12-25 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

  • 250 mL / 8.5 fl. oz. (Treats 100 L (25 US Gallons))

Additional information

Weight 0.7 oz
Dimensions 2.44 × 2.44 × 4.81 in

Reviews

There are no reviews yet.

Be the first to review “Seachem De-Nitrate – Nitrate Remover”

Your email address will not be published. Required fields are marked *